10KV Class Oil Immersed Transformer

The products use imported high permeability cold-rolled silicon steel sheets, protective resin covering the surface of the iron core and vacuum drying technology to prevent moisture and rust; the product adopts The non-hanging structure can withstand the bumps during transportation to the greatest extent and is one of the most energy-saving products produced by the company.

The products reduce the no-load loss by 30% on average; no-load current is reduced by 70-85%; It can still operate for a long time under the conditions of high temperature; the operating noise of the product is reduced by 2-4 decibels on average.

1.The oil-immersed transformer uses oxygen-free copper wire with lower resistivity, and after a series of additional surface treatments, it is smoother and has no burr sharp corners, so that the load loss of the transformer is lower and the electrical performance is more reliable. High-quality silicon steel sheets are selected, and with the improvement of performance level, silicon steel sheets with lower unit loss are used, so that the no-load loss of the transformer is lower.

2. Select high-quality laminated wood insulation, never crack

3. The transformer oil that has been deeply filtered is selected, which has lower water, gas and impurity levels, and the transformer works more reliably.

4. Use high-quality rubber sealing materials to effectively prevent aging and prevent leakage.

5. All raw materials have been strictly examined according to the national standard ISO9000.